Freescale-semiconductor DSP56366 User Manual download pdf (Page 158)

ESAI Programming Model

DSP56366 24-Bit Digital Signal Processor User Manual, Rev. 4

8-8 Freescale Semiconductor

special-purpose time slot register. The following paragraphs give detailed descriptions and operations of

each bit in the ESAI registers.

The ESAI pins can also function as GPIO pins (Port C), described in Section 8.5, "GPIO - Pins and

Registers".

8.3.1 ESAI Transmitter Clock Control Register (TCCR)

The read/write Transmitter Clock Control Register (TCCR) controls the ESAI transmitter clock generator

bit and frame sync rates, the bit clock and high frequency clock sources and the directions of the HCKT,

FST and SCKT signals. (See Figure 8-2). In the synchronous mode (SYN=1), the bit clock defined for the

transmitter determines the receiver bit clock as well. TCCR also controls the number of words per frame

for the serial data.

Hardware and software reset clear all the bits of the TCCR register.

The TCCR control bits are described in the following paragraphs.

8.3.1.1 TCCR Transmit Prescale Modulus Select (TPM7–TPM0) - Bits 0–7

The TPM7–TPM0 bits specify the divide ratio of the prescale divider in the ESAI transmitter clock

generator. A divide ratio from 1 to 256 (TPM[7:0]=$00 to $FF) may be selected. The bit clock output is

available at the transmit serial bit clock (SCKT) pin of the DSP. The bit clock output is also available

internally for use as the bit clock to shift the transmit and receive shift registers. The ESAI transmit clock

generator functional diagram is shown in Figure 8-3.

11109876543210

X:$FFFFB6 TDC2 TDC1 TDC0 TPSR TPM7 TPM6 TPM5 TPM4 TPM3 TPM2 TPM1 TPM0

23 22 21 20 19 18 17 16 15 14 13 12

THCKD TFSD TCKD THCKP TFSP TCKP TFP3 TFP2 TFP1 TFP0 TDC4 TDC3

Figure 8-2 TCCR Register

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 365 366

No comments

Freescale-semiconductor DSP56366 User Manual Page 158